Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

Microprocessor / P. L. C. based control System

Microprocessor

The control system is based on ‘state-of the art’ microcomputer technology, guaranteeing high reliability and safe operation. The computerized control unit ensures a fully automatic operation throughout the entire cycle. No futures intervention is necessary after selecting the parameters and pressing the start button. The main cycle phase and the machine’s actual parameters are displayed on the LCD panel during the cycle progress. The main physical parameters of the process, i.e. temperature, pressure, time and jacket pressure are controlled and displayed. The keyboard located on the front panel enables the operator to select a programs, start and stop the cycle, and allows a trained technician to preset the main parameters using an access code. The control system is easy to use and programmable.

 
OPTION:
  • Heating-Direct Steam, Electric, LPG or Kerosene operated steam generates.
  • Fully automatic operation through a PLC / MICROPROCESSOR sterilization process
  • Digital display temp for a semi- automatic operation. Cycle with pre - vacuum option.
  • Thermograph to record temperature and time.
  • Double door type models.
  • Stainless Steel flush mounting.
  • Blue water/Vacuum leak detection tests for vials and ampouless etc.
  • Carriages, trolleys, baskets etc. for easy movement of goods.
 
Printer (Optional)

For a clear and concise documentation of cycle process the control unit is provided with a dot matrix printer which is connected to the microprocessor. The printer generate a hard copy printout of the relevant information concerning the cycle operation such as the temperature, pressure, Vacuum, sterilization and drying time, number of cycles/number of pulsing etc. In case of an uncompleted cycle, the printout indicates the cycle failure and the cause of the failure (optional). An additional graphic printer is optional.

 
Cycle available (Automation)

The sterilizer is designed to operate up to (8) eight standard sterilization programs between 105 C and 137 C and (2) two test programs optional. All programs are selected by using the numeric keypad, and all programs are programmable. Air removal, sterilization and drying stages can be reprogrammed easily.

 
 
Home  |   About Us  |   Services    Products   |   Event   |   Our Solution     Enquiry    Contact Us    Sitemap
Designed & Hosted by : MID   |   Promoted by : GID
copyright@mackauraa.com